RADCOFLEX offers a whole range of genuine Australian manufactured composite hoses, assemblies and hose fittings for use across chemical, gas and fuel transfer applications.
RADCOFLEX composite hoses are specially engineered and tested in-house and on-site to ensure compliance with industry standards.
Some of the advantages offered by RADCOFLEX composite hose assemblies are:
Lightweight and more flexible alternatives to rubber hoses;
All RADCOFLEX composite hoses are manufactured in Australia to Australian Standards and codes of practice.
The hoses’ applications are easily identifiable by the colours on the hoses’ outer covers;
Standard average connections with visible internal and external wires, which allow for a quick visual check on the ongoing integrity of the electrical continuity of the hose assembly.
RADOFLEX’S range includes the following:
Chemical Composite Hoses
Chemdock: for use in heavy duty suction and discharge of bulk chemicals in road and rail tankers, dockside and ship to shore to EN 13765 and IMO;
Solchem: for the transfer of chemicals and solvents where the fluid may be corrosive to a galvanised inner wire to AS 2594 and EN 13765;
Solflon: for the transfer of the most aggressive chemicals and searching solvents, having a special PTFE liner, to EN 13765;
Transchem: for the transfer of various acids and alkalis to AS 2594 and EN 13765.
avfuel & avfuel Light: aviation fuel transfer hoses to AS 2683 and EN 13765;
Petrofuel & Petrofuel Light: tanker fuel transfer hoses to AS 2683 and AIP CP27;
Transdock: for the heavy duty suction and discharge transfer of petroleum products in road and rail tanker, dockside and ship to shore applications to AS 2117, EN 13765 and IMO;
Transfuel: a tanker and fuel depot transfer hose to AS 2683 and EN 13765;
Transoil: a hydrocarbon suction and discharge hose for in-plant and light-duty marine applications to AS 2117 and EN 13765.
Air, Gas & Water Composite Hoses
Bituflex: for the transfer of hot bitumen at elevated temperatures;
Transgas: for the transfer of liquid petroleum gas (LPG) and cryogenic conveyants down to -50C to AS 1369 and EN 13766;
Transheat: for the transfer of most hot fluids;
Roof Drain: for use with floating roof drain systems;
VRH: for the recovery of vapours from tanks and tankers to AS 2683.
Composite Hose – Additional Protective Solutions
PVC Spiral Guard: a PVC strip wound helically around the exterior of the hose;
PVC Wear Beads: PVC collars attached to the exterior of the hose at intervals;
Rope Lagging: a polypropylene rope wrapped helically around the exterior of the hose.
Composite Hose Fittings
Camlocks: quick-release cam lever fittings in aluminium, bronze, stainless steel, and polypropylene.
Dust Caps and Plugs: to suit camlock fittings
Flanges: standard drillings in carbon steel, stainless steel and aluminium;
Threaded Ends: standard threads in carbon steel, stainless steel, and polypropylene.